TL-WA5210G and VLANS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA5210G and VLANS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA5210G and VLANS
TL-WA5210G and VLANS
2016-09-30 14:40:07
Model :

Hardware Version :

Firmware Version :

ISP :

Hi to all,

Does someone please tell me if we can pass-through 2 or more VLANs from Bridge condition of two WA5210G ?
The IPs of the two WA5210 (in bridge mode) are on VLAN 2 but i want to pass also transparent the VLAN 3 from the bridge.

Is it possible ?
Thanks
  0      
  0      
#1
Options
6 Reply
Re:TL-WA5210G and VLANS
2016-10-03 10:08:28
Anyone ?
  0  
  0  
#2
Options
Re:TL-WA5210G and VLANS
2016-10-03 13:23:31
This device no carry to VLAN support... this info, no appear in the oficial site TL


check this





Regards
  0  
  0  
#3
Options
Re:TL-WA5210G and VLANS
2016-10-03 16:37:28
Ι saw that but i though it was for the OpenWRT firmware capability .
It is general info for 5210 ?
  0  
  0  
#4
Options
Re:TL-WA5210G and VLANS
2016-10-03 17:44:44

gvaf wrote

Ι saw that but i though

Well, if you had read it and still don't believe
Nothing to be done
  0  
  0  
#5
Options
Re:TL-WA5210G and VLANS
2016-10-03 20:17:36
also would acquire two standard routers to send and receive the necessary VLan as the TL-WR841 usin this diagram...

TL-WR841 4x --switch - 1x -------- LAN ------- 5210))))))) ) transmitting ((((((((((5210 ---------- LAN ----------- 1x --switch -- 4x TL-WR841 ...

remark, TL-WR841, need use third party firm to use VLan...
  0  
  0  
#6
Options
Re:TL-WA5210G and VLANS
2016-10-04 04:33:34
At one end of the Bridge i have one Mikrotik routerboard for client management, and to the other end i have one Cisco Airpoint Access point.
If i connect locally the Cisco and Mikrotik together, everything working fine. But in real location i have problem with the secondary Vlan (not passing).
  0  
  0  
#7
Options