Business Community > Pharos Wireless Bridges > can not set up CPE510
< Pharos Wireless Bridges

can not set up CPE510

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

can not set up CPE510

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
can not set up CPE510
can not set up CPE510
2016-10-05 05:24:37
Model :

Hardware Version :

Firmware Version :

ISP :

Hi folks,
i did try to set up my cpe510 in February, but gave up...
Ok, now i came back to it :)
I changed my ip and i can use GUI (192.168.0.254)
Pharos Control working well and device is managed (green light)
Than i went to GUI (changed password etc)
Quick set up, Access Point, IP..254, SSID TP-LINK_Outdoor_B04318 (came up automatically), next, finish
Than, again log in
quick set up
Repeater (I need to cover my huge garden), ip..254, SSID of remote AP (blank) Clicking Survey, it starts scanning but no networks in the list! ( i have got netgear wi-fi, BT, BT Hotspot, but nothing coming up in the list)
I am sure, 1st time when i tried to set it up i definitely had networks there.
What I am doing wrong?
  0      
 
  0      
 
#1
Options
13 Reply
Re:can not set up CPE510
2016-10-05 05:39:42
the Ap to link cpe510, is 2.4 or 5.8 GHZ...
  0  
  0  
#2
Options
Re:can not set up CPE510
2016-10-05 05:51:23

x3mlv wrote

Repeater (I need to cover my huge garden)

Repeater is a bad news, you have a 5Ghz device, only 5Ghz devices will connect to 510 like
iPhone 5,6 or 7 or any iPad, and Androids capable on the band
set it as AP pointing to your huge garden, and cable from 510 to your ISP (internet service provider) router
  0  
  0  
#3
Options
Re:can not set up CPE510
2016-10-05 05:59:01
Thanks for reply.
I am using Iphone SE and Ipad
so, it should be ok
  0  
  0  
#4
Options
Re:can not set up CPE510
2016-10-05 07:10:59
Forgot to tell you
Set channel/frequency 149/5745 MHz
Known channel smartphones & Tablets connect to
  0  
  0  
#5
Options
Re:can not set up CPE510
2016-10-05 13:08:46
Hi,
I didn't get that, sorry
Router (netgear) showing 2.4 and 5 GHZ to choose ( in the network list)
Iphone and i pad to use (both working with 5Ghz)

at the moment GUI showing NO network in the list
  0  
  0  
#6
Options
Re:can not set up CPE510
2016-10-05 13:11:13

Victor Ramos wrote

the Ap to link cpe510, is 2.4 or 5.8 GHZ...


Hi,
I didn't get that, sorry
Router (netgear) showing 2.4 and 5 GHZ to choose ( in the network list)
Iphone and i pad to use (both working with 5Ghz)

at the moment GUI showing NO network in the list
  0  
  0  
#7
Options
Re:can not set up CPE510
2016-10-05 13:22:08

danymarc wrote

Forgot to tell you
Set channel/frequency 149/5745 MHz
Known channel smartphones & Tablets connect to


I dont have it in my drop down. the last one is 136/5680Mhz (DFS)
in the GUI in wireless client settings still no network available.
  0  
  0  
#8
Options
Re:can not set up CPE510
2016-10-05 20:23:34

x3mlv wrote

I dont have it in my drop down. the last one is 136/5680Mhz (DFS)
in the GUI in wireless client settings still no network available.

Go to Wireless Tab first line is region, some 510s lets you change Region on the fly, others don't
If yes, change it to United States
If not, you have to Factory Defrault your 510 and start over
In Region select either Test Mode or United States, both will let you select ch. 149
How to Configure the Access Point Mode on the Pharos device?
http://www.tp-link.com/en/faq-730.html
  0  
  0  
#9
Options
Re:can not set up CPE510
2016-10-06 05:28:53

danymarc wrote

Go to Wireless Tab first line is region, some 510s lets you change Region on the fly, others don't
If yes, change it to United States
If not, you have to Factory Defrault your 510 and start over
In Region select either Test Mode or United States, both will let you select ch. 149
How to Configure the Access Point Mode on the Pharos device?
http://www.tp-link.com/en/faq-730.html


Hi, Thanks. Thats better !
US region did the job!
Set up Access Point with 149,(in the network list i saw all of my networks)
connect to the wireless network (i think it copied the name of selected network)
than set up repeater
All was fine before i followed this : http://www.tp-link.com/en/faq-730.html
Ip Auto, relocated...Plugged to the router...
than i tried to connect to the device through Pharos.
No network connection!
Chrome 192.168.0.254
No network connection!
Ethernet just stared dying. stopped opening any pages
Unplugged CPE from router
All good back on again
Still no connection to the device.
Plugged back in to the computer, Changed ip, and all working fine

Did i missed something?

Pharos Control showing managed devise (I started manage it)

Any suggestions?
  0  
  0  
#10
Options
Re:can not set up CPE510
2016-10-06 08:02:47

x3mlv wrote

set up repeater
All was fine before i followed this : http://www.tp-link.com/en/faq-730.html

Im confuse, all was fine as Repeater, correct?
And then you set up AP mode following the link
and you post Ip Auto, relocated...Plugged to the router...
sorry I dont understand
510 has to be pluged to main router, and following quick set up
first step its IP address, you have to input one from same subnet as your router
i.e. if your main router uses 192.168.1.1 you input in Pharos 192.168.1.10
in Gateway input in this example ip from main router 192.168.1.1
in SSID any name you like, channel 149, security whatever, distance auto, and thats it
do not enable MaxTream or you wont be abe to connect
thats it, the 510 has to be connected to your main router all the time via cable
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 3874

Replies: 13

Related Articles
Can not set up my wifi
235 0
cpe510 set up
687 0
Not able to set up
256 0
set up
387 0
Set up
323 0
set up
283 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.