TP-Link TL-SG108E only the Power LED, Status and Link off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link TL-SG108E only the Power LED, Status and Link off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link TL-SG108E only the Power LED, Status and Link off
TP-Link TL-SG108E only the Power LED, Status and Link off
2016-11-11 23:40:28
Model :

Hardware Version :

Firmware Version :

ISP :

Hello, I bought a new TL-SG108E. The power LED is on. The status LEDs on the ports remain off even though there is a connection. I come to the network. Reset I have carried out. The tool does not find the switch. What am I doing wrong?

Windows 10
IP 192.168.0.2

TL-SG108E V1
  0      
  0      
#1
Options
3 Reply
Re:TP-Link TL-SG108E only the Power LED, Status and Link off
2016-11-29 14:17:10
You mean everything is OK except the LED ?
  0  
  0  
#2
Options
Re:TP-Link TL-SG108E only the Power LED, Status and Link off
2020-02-27 21:49:17

@camel288  I'm facing the same issue.

 

The "Unmanaged Pro Configuration Utility" sees three of my four switches. One is a TL-SG1024DE, three are TL-SG108E.

One TL-SG108E is not recognized at all, and it is also the only one with all leds switched off despite properly functioning. Power cycling did not help.

The switches are about same age, i.e. MAC addresses are only different in last byte.
The other two I provided a firmware upgrade since they had (I think) 2014-05 firmware.

 

Any ideas?

 

Thanks.

  0  
  0  
#3
Options
Re:TP-Link TL-SG108E only the Power LED, Status and Link off
2020-02-28 02:30:52

@Sjoske 

 

If the port LED off, maybe the switch is already broken. You can use a cable to connect two switch ports directly, for checking whether the port LED lights.

 

If the port LED is normal, try to change the utility version. 

  0  
  0  
#4
Options