SG1024 VLAN for nComputing Thin Clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG1024 VLAN for nComputing Thin Clients
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
Would you help advise which VLAN settings I would need in order to keep red nComputing thin clients to only broadcast in red VLAN and blue nComputing thin clients to only broadcast in blue VLAN but their workstations (1&2) can communicate with everything else in green.
Thanks
Steve
Hardware Version :
Firmware Version :
ISP :
Hello,
Would you help advise which VLAN settings I would need in order to keep red nComputing thin clients to only broadcast in red VLAN and blue nComputing thin clients to only broadcast in blue VLAN but their workstations (1&2) can communicate with everything else in green.
Thanks
Steve
File:
Re:SG1024 VLAN for nComputing Thin Clients
I attach each port for better understanding. And here i configure VLAN2,3,4 for each part you want. Then the configuration should like: VLAN2: port1,2,3; VLAN3: port4,5,6; VLAN4: port3,4,7,8,9,10; Ports should be untagged in each VLAN. Port1,2,3 PVID should be 2; Port 4,5,6 PVID should 3; Port 7,8,9,10 PVID should be 4. Try to make it work.
