Vlans with two switches

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Vlans with two switches
Vlans with two switches
2016-12-15 06:48:52
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, I don't speak english well, but I will try to explain...

I have two switches, the principal is the Switch1( TL-SG3424) it is connected to the Router in the Port 24 and I have created two Vlans in the Router, both vlans are Tagged in Port 24,

Switch 1 is connected via Port 22 with Switch 2( T1600G-28PS).


What I did..

1.- Create Vlan 100 and Vlan 8 both Tagged in Switch 1, Ports 22 and 24
2.- Create Vlan 100 Tagget in Switch 2 Port 24 and Untagget Port 23
3.- Create Vlan 8 Tagged in Switch 2 Port 24 and Untagget Port 21
4.- Create interface vlan 100 and 8 in Switch 2


Now I suppose that with that will be enough to work, but it doesn't.

Vlan 100 works in switch 2 untagged on Port 23, only if I leave the Default Vlan 1, if I delete Default vlan , it doesn't work

I did the same with vlan 8, and I don't recive nothing from DHCP Server in the router..

What else Do I need ??

by the way, I need vlan 8 to connect the AP EAP320
  0      
  0      
#1
Options
1 Reply
Re:Vlans with two switches
2016-12-20 16:07:07
It is too complicate and you also don't mention the PVID of each port. I would suggest that you could send email to [EMAIL="support@tp-link.com"]support@tp-link.com[/EMAIL] for help.
  0  
  0  
#2
Options