Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

I have a question which might be stupid but I am curious..
I have a simple network:
DSLMODEM (192.168.0.1) <> TL-SG108E (192.168.0.30) <> Laptop (192.168.0.54)
All connections are with CAT6 cable. There are some other devices on the switch except from the laptop.

When I ping from my laptop the dslmodem i get this reply:
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64

When I ping from my laptop the swtich i get this reply:
Pinging 192.168.0.30 with 32 bytes of data:
Reply from 192.168.0.30: bytes=32 time=7ms TTL=64
Reply from 192.168.0.30: bytes=32 time=4ms TTL=64
Reply from 192.168.0.30: bytes=32 time=4ms TTL=64

And I wonder why when I ping any of the devices the time is <1ms as I would expect and when I ping the switch it is variable higher than 1ms??

The same happens if I ping a TL-SG105E (192.168.0.31) which is also somewhere on the network:
Pinging 192.168.0.31 with 32 bytes of data:
Reply from 192.168.0.31: bytes=32 time=4ms TTL=64
Reply from 192.168.0.31: bytes=32 time=1ms TTL=64
Reply from 192.168.0.31: bytes=32 time=1ms TTL=64

while the devices on the TL-SG105E reply with <1ms:
Pinging 192.168.0.91 with 32 bytes of data:
Reply from 192.168.0.91: bytes=32 time<1ms TTL=64
Reply from 192.168.0.91: bytes=32 time<1ms TTL=64
Reply from 192.168.0.91: bytes=32 time<1ms TTL=64

Thanks a lot!