TL-SG3210, VLAN and opnsense (pfsense-fork)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG3210, VLAN and opnsense (pfsense-fork)
Model :
Hardware Version :
Firmware Version :
ISP :
Hi,
I tried to set up a port based VLAN on the 3210 and an opnsense-firewall, but with no luck. The goal is to isolate port 8 from the other LAN with it's own subnet.
In opnsense, I set up VLAN 10 on LAN-interface, DHCP-Server on it and added opening firewall-roules.
The PC on port 8 gets an IP address of the VLAN-DHCP-Server-subnet, but cannot reach any internal LAN-members nor Internet.
Any hints would be great. Thanks.
Hardware Version :
Firmware Version :
ISP :
Hi,
I tried to set up a port based VLAN on the 3210 and an opnsense-firewall, but with no luck. The goal is to isolate port 8 from the other LAN with it's own subnet.
In opnsense, I set up VLAN 10 on LAN-interface, DHCP-Server on it and added opening firewall-roules.
The PC on port 8 gets an IP address of the VLAN-DHCP-Server-subnet, but cannot reach any internal LAN-members nor Internet.
Any hints would be great. Thanks.