CPE210 <===> WA5210G 2.4GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 <===> WA5210G 2.4GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 <===> WA5210G 2.4GHz
CPE210 <===> WA5210G 2.4GHz
2017-03-01 10:16:56
Model :

Hardware Version :

Firmware Version :

ISP :


Good, I am trying to create a point to point between these two teams, I could give a solution, I want to share internet from CPE210 to WA5210G, Thank you so much

------------------------------------------------
Buenas, estoy intentando crear un punto a punto entre estos dos equipos, me podrian dar una solucion, quiero compartir internet desde el CPE210 al WA5210G,

Muchas Gracias
  0      
  0      
#1
Options
3 Reply
Re:CPE210 <===> WA5210G 2.4GHz
2017-03-04 02:39:42

aldosan wrote

Model :

Hardware Version :

Firmware Version :

ISP :


Good, I am trying to create a point to point between these two teams, I could give a solution, I want to share internet from CPE210 to WA5210G, Thank you so much

------------------------------------------------
Buenas, estoy intentando crear un punto a punto entre estos dos equipos, me podrian dar una solucion, quiero compartir internet desde el CPE210 al WA5210G,

Muchas Gracias


It's complicated! This CPE 210 is incompatible with any equipment other than itself! A mess! Try to select the B/G only mode in both CPEs. No N mode.
  0  
  0  
#2
Options
Re:CPE210 <===> WA5210G 2.4GHz
2017-03-04 06:15:35

sphreak wrote

It's complicated! This CPE 210 is incompatible with any equipment other than itself! A mess!


What makes you think so? My CPE210 is compatible with any other 2.4 GHz device and works fine with TL-WA7210, the successor of the TL-WA5210. No problem at all.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:CPE210 <===> WA5210G 2.4GHz
2018-01-21 13:47:52
En mi caso es algo parecido.

Tengo un router al que le llega un ancho de banda de 20Mb hacia internet, desde el puerto LAN tengo una CPE220 en modo AP, esta apunta a un 5210 en modo Client.
Pero conectado al 5210 solo puedo navegar con 2Mps con mucha suerte.

La distancia entren ambas antenas es de 25m. Linea vista.
Potencia de ambos, no recuerdo el nro exacto ahora, pero es alrededor de 15dbi.
Están trabajando solo en modo G y canal fijo (10).

¿Que puede estar sucediendo?
  0  
  0  
#5
Options