Business Community > Pharos Wireless Bridges > TL-WA7510N V1 not work
< Pharos Wireless Bridges

TL-WA7510N V1 not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA7510N V1 not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA7510N V1 not work
TL-WA7510N V1 not work
2017-03-02 16:51:56
Model :

Hardware Version :

Firmware Version :

ISP :




644/5000




Gentiles users ask for help
I have a TL-WA7510N which I think is not working
apparently everything seems ok, I networked device that has all the lights on, configured in AP mode.
but also in its vicinity I do not read any wifi network

Firmware Version:
3.12.6 Build 130,427 Rel.69746n
Hardware Version:
WA7510N 00000000 v1
LAN
MAC Address:
E8-DE-27-BA-8F-9C
IP Address:
192.168.1.254
Subnet Mask:
255.255.255.0
wireless
Wireless AP Mode: Access Point
Name (SSID): The Magnolias
Channel: 36
Mode: 11NA HT20
Max Tx Rate: 65Mbps
MAC Address: E8-DE-27-BA-8F-9C
Traffic Statistics
Received Sent
Bytes: 0 0
Packets: 0 0
  0      
 
  0      
 
#1
Options
4 Reply
Re:TL-WA7510N V1 not work
2017-03-02 19:46:35
The problem may be due to:

1.- tl-wa7510n 5.8 GHz, you are trying to detect it with 2.4GHz devices, you will not be able to do it ...

2.- tl-wa7510n, applying the search of the device, does not find networks in 5.8 because all could be working in 2.4 ...

3.- tl-wa7510n, can not detect networks in 5.8GHz because they could all be working with proprietary protocols, call AirMax on UBNT, NV2 on MikroTik, MaxStream on Tp-Link, and others like Cambium, Ligowave, Wavion etc ...

To be more precise, I should explain a little more as he is doing the "detection" ...

Regards...
  0  
  0  
#2
Options
tanx
2017-03-03 15:59:08

Victor Ramos wrote

The problem may be due to:

1.- tl-wa7510n 5.8 GHz, you are trying to detect it with 2.4GHz devices, you will not be able to do it ...

2.- tl-wa7510n, applying the search of the device, does not find networks in 5.8 because all could be working in 2.4 ...

3.- tl-wa7510n, can not detect networks in 5.8GHz because they could all be working with proprietary protocols, call AirMax on UBNT, NV2 on MikroTik, MaxStream on Tp-Link, and others like Cambium, Ligowave, Wavion etc ...

To be more precise, I should explain a little more as he is doing the "detection" ...

Regards...





119/5000




thanks a lot, in fact I was using a network card is not dual band but only 2.4 ghz
thanks for support

Yours sincerely
  0  
  0  
#3
Options
Re:TL-WA7510N V1 not work
2017-03-03 20:24:57
Perfect ... I could do two things ...

1.- get a network card dual wirelees ... or

2.- according to the work to be done you could use TL-WA5210G, TL-wa7210N, CPE210, CPE220 or WBS210 ...

The TL-WA5210G, TL-wa7210N you can attach an external omnidirectional antenna ...

To the WBS210 you can attach an external omnidirectional antenna of double polarity ...

All WBS210 exept bring indoor built-in antenna ...

Regards...
  0  
  0  
#4
Options
ok
2017-03-04 16:03:45
tankyou i have buy a cpe210 in amazon

have a nice day

mauro
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 705

Replies: 4

Related Articles
 How to connect TL-WA7510N to the same TL-WA7510N ?
765 0
 TL-WA7510N V1 not working properly after some hours
1066 0
 Tl-wa7510n
606 0
 How to connect a TL-WA7210N in AP mode to a TL-WA7510N
906 0
 TL-WA7510n no internet
2461 0
 TL-WA7510N multicast
1803 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.