TL-SG108E Dysfunctional?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108E Dysfunctional?
Model :
Hardware Version :
Firmware Version :
ISP :
I have installed a TL-SG108E switch into my network; the only configuration is it's TCP/IP settings.
Network: 10.0.0.0 /24
IP: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
Port 1: PC - 10.0.0.254
Port 2: PC - 10.0.0.150
Port 3: Access Point
Port 4: Down
Port 5: Router - 10.0.0.1
Port 6: Down
Port 7: Down
Port 8: Down
With this basic configuration, I can get to the Internet and back, however, wired devices connected to the switch cannot connect/ping to eachother. HOWEVER
I can ping from a wired device, to any IP that is on the wireless network, which is also a connection between the switch and the access point.
Also, wireless devices cannot ping wired devices, but can ping wireless devices.
I really have no clue what is going on, this is configuring the switch with only its basic TCP/IP settings.
I could really use some help.
Hardware Version :
Firmware Version :
ISP :
I have installed a TL-SG108E switch into my network; the only configuration is it's TCP/IP settings.
Network: 10.0.0.0 /24
IP: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
Port 1: PC - 10.0.0.254
Port 2: PC - 10.0.0.150
Port 3: Access Point
Port 4: Down
Port 5: Router - 10.0.0.1
Port 6: Down
Port 7: Down
Port 8: Down
With this basic configuration, I can get to the Internet and back, however, wired devices connected to the switch cannot connect/ping to eachother. HOWEVER
I can ping from a wired device, to any IP that is on the wireless network, which is also a connection between the switch and the access point.
Also, wireless devices cannot ping wired devices, but can ping wireless devices.
I really have no clue what is going on, this is configuring the switch with only its basic TCP/IP settings.
I could really use some help.
