Business Community > Pharos Wireless Bridges > CPE210 Repeat same stations on AP status
< Pharos Wireless Bridges

CPE210 Repeat same stations on AP status

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 Repeat same stations on AP status

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 Repeat same stations on AP status
CPE210 Repeat same stations on AP status
2017-04-05 06:23:12
Model :

Hardware Version :

Firmware Version :

ISP :

Hi

I have a system on farms with cctv cams.
A CPE210, with new firmware do same as before, configured as AP, and 3 others like clients.
Each client have watchdog activated with AP IP.
When have video loss on cams I saw on AP stations status repeated station, some time 8.
Repeated station with same MAC address on stations status.
I think firmware have a bug.
Sorry my english !

carlos lopes (Portugal)
  0      
 
  0      
 
#1
Options
5 Reply
Re:CPE210 Repeat same stations on AP status
2017-04-05 11:29:35
Technically if more stations appear with the same MAC address, it is usually due to which more devices are connecting from that station, and all come out with the device masking station ...
Question ... it has been ensured that no one else has the connection credentials ...

Regards...

can you writeme to my whatsapp In perfect Spanish, of course before you do consider my time zone -5gmt
My contact details are in my signature
  0  
  0  
#2
Options
Re:CPE210 Repeat same stations on AP status
2017-04-06 05:35:06
What really happen is CPE210 as client, and ping active to AP IP, some days later, have multiple stations on AP status.
This only happens if ping active on client.
Client only have an IP camera.
All CPE´s have password activated.
  0  
  0  
#3
Options
Re:CPE210 Repeat same stations on AP status
2017-04-06 12:14:48
What I mention is strange ... but I would not be surprised by the working mode in which the CPE is configured ... Client mode, each device will be masked with the mac address of the CPE, so in the root AP, it should show Associated with:
1.- CPE itself with its own IP and MAC Address ...
2.- The Camera, with its own IP but with the MAC address of the CPE ... you should consider this ...

The most recommended would be to create a bridge for the camera to display its own IP and MAC address to the AP ...
  0  
  0  
#4
Options
Re:CPE210 Repeat same stations on AP status
2017-04-06 23:51:56

carlos lopes wrote

What really happen is CPE210 as client, and ping active to AP IP, some days later, have multiple stations on AP status.


If the duplicate MAC addresses appear in the ARP Table status, see Victor's answer #4 why this is so (on the AP's side only).

If they indeed appear in the Stations status, please post a screenshot.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:CPE210 Repeat same stations on AP status
2017-04-07 20:20:31
I configured client without ping test since yesterday and this morning only the two clients CPE210 are on AP CPE210 status table.
Today I´ll change configuration of one client with ping on.
If trouble happens again I´ll do screenshot of configurations.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 872

Replies: 5

Related Articles
 cpe 210 client fail to connect to cpe210 AP
970 0
 CPE210 will not "Lock to AP" which is another CPE210
1095 0
 CPE210 client will not lock to CPE210 AP
1368 0
Problem connecting CPE210 to EAP650 (or any AP)
229 0
 Unreliable connection to network behind CPE 210 AP and CPE210 Client
2814 0
Help with two CPE210 (AP, client and router)
1634 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.