CPE-210 LAN1 Passive POE Passthrough

CPE-210 LAN1 Passive POE Passthrough
CPE-210 LAN1 Passive POE Passthrough
2017-04-20 03:46:16
Model :

Hardware Version :

Firmware Version :

ISP :

Hi from new users :)

My question is about the possibility to hanging 2 passive PoE device with different subnet (and different brand/model) using Passive Poe Passthrough function of CPE-210 on LAN! port?

On the roof I have 2 CPE:
[A] (unknow brand) CPE (192.168.1.1) provided by my WISP (internet connection)
[B] TPLINK CPE-210 (192.168.0.254) used in AP mode to give wireless connection for outside

May connect and power CPE [A] using LAN1 port of CPE-210 [B] even they are in different subnet just to use a single data/power cable for both devices?

Many thanks and sorry for english mistakes

internet-CPE[A] 192.168.1.1
|
>ROUTER for Office wired connection
|
>CPE-210 [B] for outside wireless connection 192.168.0.254
0
0
#1
Options
1 Reply
Re:CPE-210 LAN1 Passive POE Passthrough
2017-04-23 03:37:09
No, must be on the same subnet to do so (or use VLANs). See http://www.tp-link.com/at/faq-695.html

BTW: The discussions forum is better for general questions, you would get answers much faster.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options