Business Community > Switches > T1700G-28TQ memory overflow in stacking configuration and provisioned state
< Switches

T1700G-28TQ memory overflow in stacking configuration and provisioned state

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1234

T1700G-28TQ memory overflow in stacking configuration and provisioned state

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1700G-28TQ memory overflow in stacking configuration and provisioned state
T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-07-18 18:06:34
Model :

Hardware Version :

Firmware Version :

ISP :

Model : T1700G-28TQ

Hardware Version: rev1

Firmware Version: 1.0.3 build 20160601 rel.52662(s)

Greetings,

I configured 3 T1700G-28TQ in stacking configuration. The problem is that every few days, I have a memory overflow on the master which falls in a provisioned state.

There is no loopback on the network and I have no issues when the switches aren't stacked.

Any ideas ?
  0      
 
  0      
 
#1
Options
37 Reply
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-08-10 19:10:30
memory overflow! Could you find any error message in log?
  0  
  0  
#2
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-08-17 23:03:41
No error message in log table, just notifications like :

MEMORY RISING THRESHOLD : Total Memory Utilization is 98%.

It floods the log table until it overflows.
  0  
  0  
#3
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-08-21 17:37:00

Stardos wrote

No error message in log table, just notifications like :

MEMORY RISING THRESHOLD : Total Memory Utilization is 98%.

It floods the log table until it overflows.


You can ask TP-LINK， For T1700G-28TQ，I remember they have the new firmware, But I don't know why I can't find this firmware from website, The firmware is 160923, you can ask them
  0  
  0  
#4
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-09-18 18:17:14

Stardos wrote

Model :

Hardware Version :

Firmware Version :

ISP :

Model : T1700G-28TQ

Hardware Version: rev1

Firmware Version: 1.0.3 build 20160601 rel.52662(s)

Greetings,

I configured 3 T1700G-28TQ in stacking configuration. The problem is that every few days, I have a memory overflow on the master which falls in a provisioned state.

There is no loopback on the network and I have no issues when the switches aren't stacked.

Any ideas ?




I have the same problem.

























[TD="width: 28, colspan: 4"][/TD]
Unit State
 Provisioned Ready [/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Hardware Version
 T1700G-28TQRev1 T1700G-28TQRev1 [/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Firmware Version
 [/TD]
[TD="width: 228"] 1.0.3 Build 20160601 Rel.52662(s) 		[/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Power Supply Module
 [/TD]
[TD="width: 228"] Operational


After about 2 weeks they hang. Do you solve this problem?
  0  
  0  
#5
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-09-18 18:19:18
I have the same problem.

























[TD="width: 28, colspan: 4"][/TD]
Unit State
 Provisioned Ready [/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Hardware Version
 T1700G-28TQRev1 T1700G-28TQRev1 [/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Firmware Version
 [/TD]
[TD="width: 228"] 1.0.3 Build 20160601 Rel.52662(s) 		[/TD]
[TD="width: 3"]		 [/TD]
[TD="width: 6"]
Power Supply Module



After about 2 weeks they hang. Do you solve this problem? 		[/TD]
[TD="width: 228"] Operational
  0  
  0  
#6
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-09-27 08:55:53
As I told Stardos，you can contact with TP-LINK directly, they have Beta firmware.
  0  
  0  
#7
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-09-28 15:59:12

TPTHZ wrote

As I told Stardos，you can contact with TP-LINK directly, they have Beta firmware.



Thanks for advise,but did not help for me :( I requested this firmware. Thay sanе me T1700G-28TQv2_en_2.0.0_[20160922-rel61374]_up.bin But memory leaks out, what should I do?
  0  
  0  
#8
Options
I have the same problem
2017-11-12 22:50:12
Hi there,
Is there already a solution for this?
I seem to have the same problem, not every week but press annoying...

Brian
  0  
  0  
#9
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-11-13 16:06:47

lexxus wrote

Thanks for advise,but did not help for me :( I requested this firmware. Thay sanе me T1700G-28TQv2_en_2.0.0_[20160922-rel61374]_up.bin But memory leaks out, what should I do?


You can try offical firmware http://www.tp-link.com/en/download/T1700G-28TQ_V2.html#Firmware
  0  
  0  
#10
Options
Re:T1700G-28TQ memory overflow in stacking configuration and provisioned state
2017-11-13 16:07:59

briantilburgs wrote

Hi there,
Is there already a solution for this?
I seem to have the same problem, not every week but press annoying...

Brian


You can download the new offical firmware 170608 also.
  1  
  1  
#11
Options
1234

Information

Helpful: 0

Views: 11484

Replies: 37

Related Articles
 T1700G-28TQ stacking over SFP+ fiber links?
1319 0
T1700G-28TQ v3 Omada?
428 0
T1700G-28TQ stack just says AuthFail
1660 0
 T1700g-28tq lacp
641 0
 VLAN on T1700G-28TQ not working
1910 0
 T1700G-28TQ - IGMP Snooping
819 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.