Omada Network 6.0 Release Highlights

 

As a reminder, this is a project from our community team and requires us to review each firmware update – please consider this when asking for updates and confirming compatibility. The most accurate and official notes will always be on your device’s support page; we may be able to reach out for compatibility, but it is not often readily available.

 

• Not all hardware versions of a model are guaranteed to receive a feature or update
• Check your device's download page for hardware version compatibility
• Only models and updates with significant changes or additions were included in our overview
• Minor and general bug fixes were largely left out of our firmware highlights

 

We likely missed a few models, features, or hardware versions — make sure to check your device's download page for the most accurate and recent patch notes from source material.

 

Release notes are ordered in reverse-chronological order, with the newest release notes located at the top.

Select the Controller Version highlights you wish to see.

Hardware Controller
Software Controller

Hardware Controller

Hardware controllers generally follow the same firmware versioning, which is reflected in the release highlights below. However, the most recent firmware version for your specific model can always be found on the release note page for your model.

OC200 | OC220 | OC300 | OC400

 

Omada Network V6.0.0.36 - Released December 1, 2025

The full release notes can be found here: Omada Network V6.0.0.36

 

New features:
 

• Topology view. Used for displaying VLAN information, offline devices, and isolated devices. Located in Site View > Dashboard > Topology.
   
• LAN isolation. Prevents a VLAN from accessing other VLANs. Useful for isolating one specific LAN, such as a Guest Network or IoT LAN. Located in Site > Network Config > LAN > Isolation Settings.
  • Note: This function is only supported on networks that use the Omada Gateway as the DHCP server.
     
• OUI-Based VLAN. Allows for VLAN and priority division and processing on device data packets from specific OUIs. Found in Site > Network Config > Transmission > OUI Based VLAN.
   
• Enhanced Open MLO SSID. Allows MLO to be enabled when encryption is set to None.
   
• Advanced multicast configuration. Integrates multicast associations as well as IGMP/MLD Snooping options into one window. Located in Global > Network Config > Network Settings > LAN > Multicast.
   
• Support for Storm Control, another method of Bandwidth Control for Switches. Located in Device Config > Switch > Switch Ports > Port Profile > Edit Port Profile > Bandwidth Control.
   
• Ability to view offline clients as well as exporting client lists.
   
• Additional network tools such as remote real-time packet captures and interference detection.
   
• Support for custom logo uploads for voucher printing in Configuration > Hotspot > Voucher Groups > Create/Edit Voucher Pattern and for Vouchers in Group > Edit Voucher.

 

Software Controller

Omada SDN Controller V6.0.0.24 - Released October 31, 2025

The full release notes can be found here: Omada SDN Controller v6.0.0.24

 

New features:
 

• Topology view. Used for displaying VLAN information, offline devices, and isolated devices. Located in Site View > Dashboard > Topology.
   
• LAN isolation. Prevents a VLAN from accessing other VLANs. Useful for isolating one specific LAN, such as a Guest Network or IoT LAN. Located in Site > Network Config > LAN > Isolation Settings.
  • Note: This function is only supported on networks that use the Omada Gateway as the DHCP server.
     
• OUI-Based VLAN. Allows for VLAN and priority division and processing on device data packets from specific OUIs. Found in Site > Network Config > Transmission > OUI Based VLAN.
   
• Enhanced Open MLO SSID. Allows MLO to be enabled when encryption is set to None.
   
• Advanced multicast configuration. Integrates multicast associations as well as IGMP/MLD Snooping options into one window. Located in Global > Network Config > Network Settings > LAN > Multicast.
   
• Support for EoGRE tunnels on Omada EAPs. Located in Device Config > EAP > EoGRE Tunnel.
   
• Support for Storm Control, another method of Bandwidth Control for Switches. Located in Device Config > Switch > Switch Ports > Port Profile > Edit Port Profile > Bandwidth Control.
   
• (Linux only) Support for Controller hot-standby redundancy. Located in Global > Settings > Cluster > Hot-Standby Backup.
   
• Ability to view offline clients as well as exporting client lists.
   
• Additional network tools such as remote real-time packet captures and interference detection.
   
• Additional charts to track connectivity for devices and clients. Located in Devices > Device Details > Overview.

 

Some features have changed locations. Check the release notes or the FAQ document for the new locations.