@GRALVES The screenshot shows you have IP conflict. What's your topology? And what is the conflicting MAC address for?

@RoarinRow I'm not familiar with firewalla. Is the port selected means a tagged port? I just saw it's in VLAN33, but don't know its egress rule. Tagged port is what really matters.

@GRALVES Hey, When you power on the switch, did you keep click the keyboard? If no, the switch will enter autoboot process, and you will fail to enter the BootUtil menu. BTW, if the switch refuses to...

@desperado Hey, On controller, you can check the WAN status under Details. See this image. If you want to specify some devices to a specific WAN interface, you should configure policy routing. Hope...

@M.fouad Hey, For your first requirement, you can enable Application Optimized Routing. In this way, the router will consider the source IP address and destination IP address (or destination port) of...

@MaelWM Hey, You need to add an easy smart switch in front of the second WAN port. The uplink port that connects to ISP should be tagged in VLAN500, and the downlink port that connects to the WAN2...