superczarLV2Offline
Following: 0Followers: 0
Forums/ WiFi
2017-09-20 03:06:41
Re:EAP110 real world throughput
R1D2 wrote I have not much experience with UBNT gear, only did test an AirGrid M2 HP without much success, but using 40 MHz channel width in 2.4 GHz is a problem for every device, since it needs 8...
0HELPFULS
Forums/ WiFi
2017-09-19 16:15:19
Re:EAP110 real world throughput
R1D2 wrote Don't buy the whole equipment w/o having tested beforehand! Get an EAP110-Outdoor from Amazon for testing, you can send it back if it does not fit your needs. As for iperf rates in...
0HELPFULS
Forums/ WiFi
2017-09-19 05:46:05
EAP110 real world throughput
Model : Hardware Version : Firmware Version : ISP : Following on from this thread- Gated Community Wifi for CCTV and hotspot Can anyone using the EAP110 comment on the real world throughput that they...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-09-18 19:19:58
Re:Gated Community Wifi for CCTV and hotspot
R1D2 wrote You're welcome. If you have deployed the network, please let the forum know wether it worked out for you. Have fun! Sure - Hoping to get it all done over the next weekend.. Will keep the...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-09-17 16:30:05
Re:Gated Community Wifi for CCTV and hotspot
R1D2 wrote Are you using CPE210 for the directional link? Wouldn't recommend this. Use CPE510 instead. CPE210's directional antennas have a beam width of 65° (H plane) / 35° (E plane), not well...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-09-16 23:14:52
Re:Gated Community Wifi for CCTV and hotspot
R1D2 wrote Unfortunately there are no antenna patterns published for EAP110-Outdoor, but we cover a RV park with one CPE510/EAP110-Outdoor combination on the roof of a 2-story building (about 8-9...
0HELPFULS