If you start with two independent SDNs with ER605/OC200/TL-SG22110P each with their own ISP. SDN#1 has a VLAN 31 (192.168.31.1/24) SDN#2 has a VLAN 32 (192.168.32.1/24) On SDN#1 if the managed switch...

Seems to me the EAP225 Outdoor access could be abused by high wind. Is there a plastic support that could keep the "rabbit ears" alligned even in high wind. To buy a box for the acccess point seems...

@A-Bru May not be what you had in mind, but Ihad a similar problem getting WiFi my pump house. My solution was to install a Shelly Relay that has the capability to repeat a wifi signal. I put a...

Thanks for the great ideas. Apparently when the data populated the screen, the "Action" field went off screen and a faint right/left scroll bar appeared. Now that I found the scroll bar all is well....

I only have one administrator with full privileges. I can continue to add Port Forwarding entries but do not understand how to delete them. Controller Model:OC200(UN) Ver: 1.6 Controller...

Settings > Transmission > Nat > Port Entered two entries From WAN Port 85 to 192.168.30.250 to port 85 - TCP only From WAN Port 2085 to 192.168.30.250 to port 2085 - TCP only Everything worked fine,...