@Dougwor Is the speed of the connection important to you at the second building? If so then keep in mind that with MESH you will lose some of that performance and when you add hops in (one wireless...

@italy-user Have you tried manually setting the channel on the CPE510? Not sure what channels are used in your area but if available try to set it to 161. I actually would address the other issue...

@I.T.admin belated Merry Christmas If you have not purchased already, I would research more. Don't let the lower cost be the deciding factor. That is exactly what I did and now have a full Omada...

A while back I recommended a feature to make viewing client information easier, which was to allow both Overview and Statistics to be opened simultaneously, since there is plenty of room for this to...

@JeremyRLondon disconnect switch from your local network. Set a PC or Laptop to static IP of 192.168.0.10 and subnet 255.255.255.0. Connect with ethernet to switch. 192.168.0.1 should work now. Login...

@DanWalt The EAP225 does not have a repeater mode. In your scenario, having just one EAP225, it would need to be wired to the router. If you had a second EAP225 then you could have one wired to the...