@Joxx based off the link you provided, this is what the back of your EAP115 Wall looks like. Your router / switch needs to be a POE switch compatable with the specs shown in the image. If your switch...

@condor106 I don't see the need for two CPE. I have been running the setup below for two years with excellent results. If you have not need for outdoor wifi at the home location then by all means use...

@fatdog22003 at that distance I would not try to use the two EAP225 as a bridge. Some people have kind of turned their noses up at this configuration that I use but its performance over the past two...

@wacanam you should be able to just add your hardware controller to the cloud and that will solve your issue.

@Brahms as @Virgo pointed out, during your initial setup, which is not that big of a deal since you do it once, set the CPEs to an ip address that makes them accessible from your network. I am trying...

@Od3 Wait for confirmation from TPlink directly or others that know for sure but... If I am reading the specs correctly for each device, the EAP110 is Passive POE only and therefore cannot be powered...