@danilodal1976 I had a similar issue with a CPE710 in client mode seeing my EAP610. The issue was with the channel. I had to manually set the EAP610 to 169 in my case for the CPE710 to find it in a...

@TallBoy68 It would be beneficial if you could post screenshots of your CPE710 configuration page, particularlly the Status and Wireless Tabs. You don't have either of the CPE710 set to "feed only"...

@norbert_pdm Hopefully this helps a little. In the first image below, the Main AP that is wired to the router / modem is at the bottom of the list. All of the other APs are connected wirelessly to...

@Virgo thanks. I have looked over that many times until my head hurts. So after studying this a little it would appear they are incorrect on the results that are shown on the Omada Map, which I...

@BeachBumFL I think that is a good choice. The one thing I noticed, and it may not be the same for you, is my OC200 took a few minutes to connect. Initially I thought there was something wrong so I...

@Virgo what about the pattern? I guess I am not understading what the map is showing. It looks like having the front of the AP, facing the desired area of coverage is a bad idea. For example the two...