@Clive_A Thank you. the configuration is this: ER605 set to 192.068.0.1 Omada Controller OC 300 is set to 192.168.0.27 (i try to force it on 192.168.0.2 but nothing appen also if i restart...

i'll not see on my omada dashboard. i've to force upadate?

Hi, i've an enviroments as described below: OC300 CONTROLLER 1 GATEWAY ER605 V 2.0 1 SWITCH 52 PORT POE V 3.20 There is a building with 150 client average. The system work normally with sometimes...

The problem was solved? I've an omada environment of 67 access point eap 660 and i'm going to but 2 of it 48+switches to manage it better than multiple 5p poe switches. I don't want to end up with...

Hi Joesea, yes , you've you hit the spot. from device nr 35 the system perform poorly. From initial bandwith of 1gbps/1gbps the first 10 ap is about 900/900 from mesh ap 11 to 20 is about 800/800...

Hi guys, I'm making a mesh network system of 80 eap 660hd devices in mesh mode. I have a first AP root plugged directly into a 10 gigabit tplink vpn router. And then the other 79 cascaded after the...