@638 I figured the same topology from your first post. So for some reason you cannot see the network from the switch port connected to the wall AP, connect the same cable to the laptop and see if you...

@jmursyd Yes, the best option is to have 4 CPE's, just remember to set the middle ones on different channels and if possible different heights to avoid interference. The other option, which is...

@638 Do you mean you want to connect EAP235 Wall with mesh? Unfortunately, wall APs don't support mesh, and there is a good reason for that. Wall-plate APs are the most fixed APs in the network, so...

@AlexS20 I've raised this issue to HQ, and they will fix this soon. I'll update this thread once the new firmware is released!

@JonnieBeGood Nice drawing! I'm not concerned about that 28% in 2.4GHz, it's not a big deal. You may try to manually change the channel to see if it changes or not. The adoption becomes confusing as...

@JamesTav Hi, I don't know now, but you can find out with the Wireshark. I can try later today.