@Ugovic, I'm not able to determine if your individual switch is region specific based on the information provided. For an unmanaged switch the only region specific item I'm aware of would be the...

@Houseofdreams_ DHCP services on pfSense are unique to each interface so don't assume it's running on your 10.10.10.x network based on it working on other networks. Most likely it's an issue with the...

Hi @Ugovic, There's a SG1024D v11 that has two little switches on the right to toggle isolation mode and loop prevention. Sadly, there was not a user manual for this specific version. From the...

@Houseofdreams_, assuming that you're using DHCP, if you can plug a computer into port 21, do you get a 10.10.10.x address?

@Antony23, all untagged members on the same vlan. The eap does have an option to set the Management VLAN. If you do that then the management VLAN id would be tagged on the eap's ports.

Hi @Antony23 The simplest setup is to make the controller and eap ports untagged members of the same vlan with the PVID set as well. The vlans mapped to the SSID need to be tagged on the eap's ports...