momopoemLV1Offline
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2025-07-12 02:05:50
MLO meshing is not possible with EasyMesh on Archer routers
To the tp-link router specialist, I've heard this before, but the EasyMesh on the Archer series routers from tp-link, which are heavily advertising Wi-Fi 7, is unable to mesh the essential MLO...
1HELPFULS
Forums/ Wi-Fi Routers
2025-06-30 07:53:51
Re:IPTV(IGMP/IP Multicast) control on BE900 with AP mode
@Joseph-TP After that, they released a beta version of the firmware, and when I checked the operation, the Hikari TV tuner continued to receive multicast packets. Only in AP mode, it seemed that a...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-10 04:12:40
Re:IPTV(IGMP/IP Multicast) control on BE900 with AP mode
Wherever I write "L2 Switch", it is "L3 Switch". Also, please forgive me if the words are a little strange.
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-10 03:43:13
Re:IPTV(IGMP/IP Multicast) control on BE900 with AP mode
> Both IPv4 and IPv6 are connected to the Internet, but the Hikari TV multicast packets will stop. To add a bit more detail in the postscript, the topology is as follows: ONU->NTT Router...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-09 05:14:14
IPTV(IGMP/IP Multicast) control on BE900 with AP mode
Dear tp-link customer support, This is the same issue I asked about previously in the following thread: https://community.tp-link.com/en/home/forum/topic/662230 Last time it was the BE805, but this...
0HELPFULS
Forums/ Wi-Fi Routers
2025-02-16 06:51:53
Re:Satellite under BE805 MLO is not meshed with BE900
@Joseph-TP > Currently, MLO/IoT/Guest Wi-Fi can't be extended in an EasyMesh network.This is for all tp-Link routers that support EasyMesh. IoT and Guest SSIDs can be done later, but MLO is the key...
0HELPFULS