@Wayne-TP I have now installed additional KH100 hub, that is closer to these valves (so the temp sensor and these 2-3 closest vales are connected to the new hub) It seems they are in sync now, at...

@Wayne-TP no, unfortunately not, as the "delay" option can only be set to 3h 59 minutes..... (same limitation).

I'm using P100 automation - and I want to trigger "ON" state for a specific period of time. In my case, I do not want the cordless vacuum cleaner to be charging all the time 24/7, so when its needed,...

@Wayne-TP yes, the readings seems to be stuck for some time. I did try to restart the app, or pull down to refresh, or go into the specific TRV. Also, note how much the temperature is off - it's...

Additionally I have noticed that even though all valves have good range and do not report interference - the ones in my bedroom that cause most issues seems to have bigger problems reading the...

@Wayne-TP I believe there might be a slight change in operation since last year (*two firmware versions were released), but in general, as many users have noticed, the problem can be summarized as...