Hi Danymarc I encountered a similar issue just like what you encountered before and the problem was caused by the LAN cable. We used a non branded LAN cable. After switching to a good quality LAN...

Hi Cadizfox Try to reset the router just like what Matthew Cook have suggested then try these: TL-WR740N IP : 192.168.0.1 TL-WA850RE IP : 192.168.0.2 (change its ip to this value) TL-WA730RE IP :...

To anjemalo The IP addressing is correct. Please double check the subnet mask and gateway settings on your TL-WA801ND. IP : 192.168.1.200 Subnet Mask : 255.255.255.0 Gateway : 192.168.1.1 Finally,...

hi PNemesis After turning on your router and the SYS LED does not blink / flash after about 1 minute, you need to have it checked or returned to our vendor. I think this is called a hardware failure....

hi helper I hope I understand your question perfectly. 1.) Sandy is correct. The MAC address of the router is printed underneath the router's sticker. I think the MAC address is fixed, it cannot be...

hi k_r_h Try this Signal Room - AP1 - AP mode Main Office - AP2 - repeater mode (repeat signal from AP1) Side Office - AP3 - repeater mode (repeat signal from AP2) From AP2, there must be a...