GPBLV2Online
Following: 0Followers: 0
Forums/ WiFi
2022-10-21 21:34:24
Re:EAP653 is not able to handle more than 800-850 MBit/s throughput (5GHz, WiFi 6) ?
@RobertMEF Definitely interesting. There was an "official" review of the 660 (also 4x4) and the reviewer discovered this limitation of two 2x2 devices limited to sharing the same channel. TP did...
0HELPFULS
Forums/ WiFi
2022-10-21 20:22:35
Re:EAP653 is not able to handle more than 800-850 MBit/s throughput (5GHz, WiFi 6) ?
RobertMEF wrote @GPB but thats entirely to blame on the Apple-Devices. Currently not a single Apple Device (I have iPad Pro 2021, iPhone 12 Pro Max, MacBook Pro 2021) is able to get more than 650-750...
0HELPFULS
Forums/ WiFi
2022-10-21 16:27:10
Re:EAP653 is not able to handle more than 800-850 MBit/s throughput (5GHz, WiFi 6) ?
@RobertMEF Similar results on my EAP670 (80mhz), when I run a speedtest (500mbps max) and iPerf3 with iphone (AX) and ipad (AC), same AP, I can only get a peak of about 650mbps. They don't seem to...
0HELPFULS
Forums/ WiFi
2022-10-14 17:07:09
Re:Problem of stability wifi 2.4GHz
@kluszon This sounds similar to the problem experienced with the EAP245v3 v5.08. Both units had f/w released at the same time, but some complained about issues with the 245v3, and I too had similar...
0HELPFULS
Forums/ WiFi
2022-10-07 17:00:37
Re:Different SSID for 2.4 Ghz & 5Ghz
@Bignose21 Tuya needs the same network, whether it's 2.4 or 5ghz, both of your devices will still be on the same network. An example where they wouldn't be is if you have a VLAN setup, say for Guest...
0HELPFULS
Forums/ WiFi
2022-10-04 15:03:42
Re:Optimal Performance of multiple 2x2 STAs on 4x4 APs like the EAP660HD
@JSchnee21 I ran a test with the EAP670, using an iphone (AX) and ipad (AC). While running iperf3 on the ipad (about 500mb/s) I initiated a speedtest on the iphone (also 500mb/s). Unfortunately, when...
0HELPFULS
1456...