@thomas_l Hi, From your screenshot of the "ThomasIphone" connection as well as from the WireGuard client log we can see that the IPv4 address of the WireGuard server ("Endpoint") is being replaced by...

@ibrahimcetin Hi, It appears to me as if your procedure is not quite correct. If the HG8245X6-10 is your main EasyMesh router, then it means the AX53 will be added as an EasyMesh Satellite. For this...

@IGORR As previously explained by TP-Link staff, at least on newer products the rightmost number of the version indicates the factory where the product was made at. Version "...0" are apparently made...

@Anders337 Hi, If you want to be sure it isn't because you set up something wrong, then perform another factory reset and after the router has booted up again check the LEDs and the Wi-Fi right away!...

@Agostino1972 Make sure you click on the "Router" pictograms and check whether the MAC address of the "Host Network" device is indeed F0:09:0D..., and not EC:75:00... The web interface of the RE is...

@Darik Wi-Fi adapters usually don't provide a way to digitally read out their TP-Link hardware version and serial number. But from the information you extracted from Windows we know that your Archer...