@Contessa You wrote earlier that you've set the A54 to "LAN TYPE is 'Static IP'". The setting "Static IP" means the A54 will use the IP Address, Subnet Mask and Gateway from the entry fields shown on...

@Contessa TP-Link has been using a few different designs of the admin interface on their routers. Just click through the menus and look for one named something with "DHCP".

@Contessa Hi, Make sure you don't have the DHCP server enabled on both, the primary router and the Archer A54. If there is more than one DHCP server active within a network, then client devices will...

@Dariuk Some ISPs have the habbit of locking their customer's broadband Internet connection to the MAC address of the first router (or network device) that was connected to it after it was activated....

@Dariuk If I understand this article correctly (I use Google translate) https://www.digitalcitizen<dot>ro/configureaza-pppoe-router-tp-link/ (replace <dot> with .) then Digi only uses username and...

@weirdobeardo48 Hi, The definition of "EasyMesh via Ethernet Backhaul" (i.e. wired backhaul) is that the Easymesh Satellite is connected by Ethernet cable to the EasyMesh Main router. Connecting the...