@Dariuk Hi, Many ISP's require a so-called "VLAN ID" to be configured on the router and without it the Internet just won't work. Therefore, it would be helpful if you mentioned the name of the ISP...

@MrVegas76 Normally, in the log of a working PPPoE connection every "pppoe send" message would be followed by a "pppoe receive" message. In your log the Archer GE800 is repeatedly sending its initial...

@h2ogeek Ok, but it doesn't matter what the numbers for the two "X" actually are. If the "Internet IP Address" shown by your Archer GX90 starts with 100.100. ..., then this IP address is an internal...

@Paddy99 If you mean you have set a static IP address within the "LAN Settings" of the TL-WA855RE, then make sure that IP address falls within the subnet of the router's network. In case the extender...

@Paddy99 Hi, Accessing the extender via tplinkrepeater.net might not work under certain circumstances. In such a case you need to access the extender via its actual IP address. If you have not...

h2ogeek wrote Step 1: IP Address: 100.100.X.X -> OK @h2ogeek Hi, This is NOT a public IP address. The range 100.64.0.0 – 100.127.255.255 is being used for CGNAT. That is the reason why you cannot...