@aurel220 Ok, that is weird. I assume you are still using the same phone with the same Tether app as before the reset of the RE550, right? Anyway, what about the other problem you mentioned? Not...

@thomas036 Hi, Here is a link to the Homeplug AV2 specification: https://docbox.etsi<dot>org/Reference/homeplug_av21/homeplug_av21_specification_final_public.pdf (replace <dot> with . ) Just start...

@Robuck Ok, I see. While you run a speedtest, can you please check the relation between the Ookla speeds of your laptop and the "link speeds" shown by the BE550? (in the "Clients" menu click the "v"...

@aurel220 Hi, Resetting the device will also unbind the device. So, after a reset you have to bind it again. In case you are already trying to bind it, but it fails, then please post the error...

@Mads123 Hi, It depends on which LED is not on. If the "Powerline" LED is off (the one with the pictogram), then either the two Powerline adapters are not paired or the distance between the two is...

Robuck wrote I have played around with the channel width and ultimately settled on 20/40/80Mhz for the 5G band as it appeared to be more stable. It should be noted my VM hub 5 is also using the same...