I have dozens of attempts/resets to get the CPE 210 to connect in client mode (hardwired to computer) or bridge mode (wireless). All go normally using the pharos quick set-up routine , Every attempt fails to connect. Main router is LinkSys E3850. I have left the unit IP default static, tried dynamic. Set is to the 192.168.#.xxx of the host network. all with no avail. Always shows up as "unidentified network", and diagnostics always responds with IP configuration error. This would seem to be a common issue however I do not see this problem on searches. Basic set up. Wireless router---->> CPE210---->>Power Adapeter---->>> computer ethernet port. I have even tried manually entered the CPE IP address and MAC address into my routers DHCP reservation table a few times. Maybe this one is broken.
cpe210 client ip configuration errors
2019-06-08 19:10:29 - last edited 2019-06-09 05:52:52
Hardware Version: V2
Firmware Version: CPE210(US)_2.0-up-ver2-2-0-P1[20190228-rel34494]