CPE 210 connectivity to EAP 110

CPE 210 connectivity to EAP 110
CPE 210 connectivity to EAP 110
3 weeks ago

Can CPE 210 be connected to an EAP 110 directly via the ethernet ports.   

 

Application is from one building with a CPE 210 in AP Router mode  broadcasting to another CPE 210 in client mode with direct connectivity to EAP 110 .   This would allow me to broadcast from a Cable modem at far end  and extend services with direct line of site to the other CPE 210 about 600 feet away ..connecting this CPE to an EAP 110 would allow the signal to travel wirelessly to my home 200 feet away ......

0
0
#1
Options
6 Replies
Re:CPE 210 connectivity to EAP 110
3 weeks ago - last edited 3 weeks ago

@Danicor, yes you can do that. Diagrams below show cabling for CPE510 and EAP110-Outdoor, but the cabling scheme is identical for CPE210 and EAP110, too.

 

 

Or, if your CPE still has a second Ethernet port (but check power budget for PoE-passthrough first!):

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options
Re:CPE 210 connectivity to EAP 110
3 weeks ago

@R1D2     You have provided me with great information and its very much appreciated!

 

With regards to the EAP 110 would a person be better off to connect an EAP 225 using the 5 gig band to avoid interferance with the 2.4 gig of the CPE 210?

 

 

0
0
#3
Options
Re:CPE 210 connectivity to EAP 110
3 weeks ago

@Danicor, yes, an EAP225 would be better with a CPE210.

 

But probably a CPE510 would also perform better over a distance of 600ft compared to a CPE210 (depends on how many foreign APs are around) and even then I would use an EAP225 for a CPE/EAP combo nowadays.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
1
1
#4
Options
Re:CPE 210 connectivity to EAP 110
3 weeks ago
Thanks agaain my friend!.... I ordered CPE 210's as I thought I might have some minor obstructions but since decided to avoid using 3 point connectivity and not deal with leaves etc. In my area I'm in rual enironment with the sea on one side and houses typically 1000 feet apart. Could a person invoke the TDMA function on the 210's to avoide potential interferance?.... or am I misunderstanding the propratoriy technology Pharos Maxstream? Hard to belive that 15 years agao I used to design networks .... tech has changed alot
0
0
#5
Options
Re:CPE 210 connectivity to EAP 110
3 weeks ago - last edited 3 weeks ago

@Danicor, a TDMA like MAXtream is useful for PtMP links, not so much for PtP links:

 

 

Your decision to order CPE210 was correct, it performs better then a CPE510 if leaves are in the way and with houses apart this far I assume there will be no issues at all with interferences.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#6
Options
Re:CPE 210 connectivity to EAP 110
3 weeks ago
Thanks again!
0
0
#7
Options