After Setting Vlan's in the VDSL Router, and getting it all to work, i cannot access my switch via GUI. I can access it if i plug a laptop directly in to a different port, but not from within a Vlan.

Here is my setup:

I have setup port 1 of the T2600G as tagged for Vlan 70, aswell as the Router port 1. Also Pvid 1 of the switch is active, but untagged on all ports, exept for port 2 to prevent loop.

Port 2 and port 25 of the T2600G has tagged Vlans 30/40/60.

The Router(port 2) and the T1500G(Port 9).Pvid 1 of the T1500 switch is active, also untagged on all ports

The EAP's are setup to broadcast multiple SSID's, separated by Vlan. All work fine, and recieve an IP Adress from the router for management.

The T1500G, T2600G and router have a static IP, lets say 192.168.0.2 and 192.168.0.3. The router has 192.168.0.1

The PC's Are on Vlan 70, laptop on Vlan 60.

The Router has inter-Vlan enabled, and that part is working, since i can access everything.

There is interlan routing between Vlan 60 > 70 and the Maintenance LAN(1).

For some reason, i can acces the GUI of everything, exept the T2600G. The 2600 i have to access via an unconfigured port. 

Anyone have an idea why?

Cheers, Ashley