Port problem on TL-SG1024DE switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Port problem on TL-SG1024DE switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port problem on TL-SG1024DE switch
Port problem on TL-SG1024DE switch
2020-06-14 17:12:50 - last edited 2020-06-18 03:33:07
Model: TL-SG1024DE  
Hardware Version: V3
Firmware Version: 1.0.1 Build 20180629 Rel.58591

Hi! There is a TL-SG1024DE 3.0 switch that sometimes gets stuck after a day on the port to which an infrequently used device is connected. This happens with several different devices, even if I plug it into another port.

The firmware is the latest.

After I restart the device the problem is solved for a while.

Can there be a unique device error?

Please help anyone who has experienced anything like this or knows the solution to this problem.

Thanks.

  0      
  0      
#1
Options
2 Reply
Re:Port problem on TL-SG1024DE switch
2021-05-10 06:27:32

@MCsaba Hello, I have exactly the same problem. Unfortunately there is no new firmware that fixes the problem. 

  0  
  0  
#2
Options
Re:Port problem on TL-SG1024DE switch
2021-05-11 08:54:26

@Tim_Meier 

Hi, 

 

Can unplug the device and plug it back to the port solve this issue? If so, the issue might be caused by Green technology.

 

Below is what I found on TP-Link official web.

 

Power down Idle Ports

When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1024DE can automatically detect the link status of each port and reduce the power consumption of ports that are idle.

 

 

Just striving to develop myself while helping others.
  0  
  0  
#3
Options