Business Community > Switches > T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
< Switches

T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
2021-07-04 23:12:01
Model: T1500G-10MPS  
Hardware Version: V2
Firmware Version: 2.0.5 Build 20200109 Rel.37690(s)

EAP235-Wall:

 

T1500G-10MPS

 

pfSense

DHCP LAN

Subnet 192.168.1.0
Subnet mask 255.255.255.0
Range 192.168.1.1 - 192.168.1.100
 

DHCP WiFi_Guest

Subnet 192.168.5.0
Subnet mask 255.255.255.0
Range 192.168.5.1 - 192.168.5.100
 
 
Problem:

Sorry for my English.

I have an EAP235-Wall connected to port 8 of the T1500G-10MPS
Publish 2 SSIDs, one for the private network and one for the guest.
Anyone connecting to the guest network must only be able to access the internet.

Clients connecting to the main wifi network browse and see the other clients on the lan.

Clients connecting to the guest network do not even receive the IP from the pfsense which is connected to port 1 of the switch.
I have read several guides but I cannot get the system to work.
It appears that the switch is not handling tags properly.

Can you help me configure the devices correctly?

Thank you.

  0      
 
  0      
 
#1
Options
3 Reply
Re:T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
2021-07-05 00:06:22

@Master_of_Mouse 

 

An afternoon wasted and the fault was the firmware of the EAP235-Wall
Once updated the system worked.

  0  
  0  
#2
Options
Re:T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
2021-07-06 02:17:09

@Master_of_Mouse 

Can you share which firmware you upgraded?

  0  
  0  
#3
Options
Re:T1500G-10MPSv2 + EAP235-Wall + pfSense - MultiSSID vlan tag issue
2021-07-06 04:53:34 - last edited 2021-07-06 04:57:54

@Somnus 

from original EAP235-Wall(EU)_V1_1.0.2 Build 20200917

to last EAP235-Wall(EU)_V1_3.0.0 Build 20210322

 

New Feature/Enhancement:
1. Add Dynamic VLAN function.
2. Add Auto Channel Deployment function (need to work with Cloud-Based Controller).
3. Add Daylight Saving Time.
4. SSH supports writing the Controller IP address to EAP. The command is: xsetctrladdr “controller IP:29810”.
5. Add past connections function to show the historical connection clients.
6. Add the list of client association time activities and client association activities.
7. Optimize compatibility with intel wireless adapter.
8. Set the default SSID encryption mode as AES.
9. Optimize security vulnerabilities.

 

Bug Fixed:
1. Fixed the bug that the wired clients connect to the LAN ports of EAP235-Wall will not get an IP address if the Management VLAN and LAN Port VLAN use the same VLAN ID.
2. Fixed the bug that the wireless clients connect to the corresponding SSID will not get an IP address if the SSID VLAN and LAN Port VLAN are enabled at the same time.
3. Fixed the bug that the portal function of the first 2.4G SSID may not take effect when changing the configuration of the HTTPS Redirect function.
4. Fixed the bug that the “client detail log” may not be sent normally to the log server.
5. Fixed the bug that we can set invalid VLAN ID in Management VLAN settings.
6. Fixed the bug that the invalid VLAN ID 4095 may take effect in the SSID VLAN function.
7. Fixed the bug that the statistics of clients’ Tx/Rx rate may be incorrect.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1120

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.