CPE Deployment

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE Deployment

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE Deployment
CPE Deployment
2021-07-09 07:41:39
Model: CPE510  
Hardware Version:
Firmware Version:

Hi Guys,

 

Good Day1

 

Could you help me with this kind of Setup in CPE..we are planning on deploying a CCTV network in one of the area here in our place..is this kind of topology feasible?

Thanks for the help in advance

 

  0      
  0      
#1
Options
4 Reply
Re:CPE Deployment
2021-07-12 10:10:56

@Semaj26 

Usually, CPE is used to build point-to-point transmission. You can read TP-Link's official guide:

https://www.tp-link.com/us/configuration-guides/common-applications-for-pharos-products/?configurationId=22033

 

They also have set up video:

https://youtu.be/ISUSlTcgWks

 

Hope you can get them work.

  0  
  0  
#2
Options
Re:CPE Deployment
2021-07-13 03:11:01
Hi @Somnus thanks for the reply. I already have an idea in the PtP and PtMP but my worry is the cascading of Multiple CPE like in the Topology..will it work without a problem? or what is the best for that kind of setup? Thank you
  0  
  0  
#3
Options
Re:CPE Deployment
2021-07-15 08:40:07
Theoretically it will work, but the performance depends on your wireless environment, after all, they are connected through the wireless signal. You can fix APs on different channels to avoid overlap.
  0  
  0  
#4
Options
Re:CPE Deployment
2021-07-16 03:04:07
Ok thanks @Somnus..maybe we will just have to try the setup in order to find out..thanks again
  0  
  0  
#5
Options