Communication between point B and C

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Communication between point B and C

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Communication between point B and C
Communication between point B and C
2021-07-16 14:19:51
Model: CPE220  
Hardware Version:
Firmware Version:
I have 2 CPE 220 and 1 cpe 210.

CPE A = Access point (Head office)
CPE B = Client (Office)
CPE C = Client (Office)

I need the computers at points B and C to communicate with each other. What is the best way to do this.
  0      
  0      
#1
Options
3 Reply
Re:Communication between point B and C
2021-07-19 06:35:50

@AlejandroC 

 

Just make sure there has no IP Conflict for the AP and Client, for example, the IP for Access Point is 192.168.0.254, then Client 1 we can set it as 192.168.0.253, Client 2 set it as 192.168.0.252, the last number of 192.168.0.x should be different, and the PCs in two different Clients will communicate with each other.

 

To determine it can work, you can try to Ping PC 2's IP address on PC 1 after the configuration for all CPEs.

  0  
  0  
#2
Options
Re:Communication between point B and C
2021-07-19 13:07:58

@John1234 

It does not work. from point B I can ping point A and from point C I can also get to point A, but between B and C not. I have a mikrotik router with dhcp server at point A. But the 3 cpe are with static ip

  0  
  0  
#3
Options
Re:Communication between point B and C
2021-07-22 03:17:11

@AlejandroC 

You can go to CPE B's page, and click on Ping Tool on the CPE's management page, then Ping the IP of CPE C.

 

If CPE B can Ping CPE C successfully, make sure that the TCP/IP rule for the computer is getting the IP address automatically.

 

Maybe you can try to upgrade the firmware version for the CPEs.

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 433

Replies: 3