T1700X-16TS WOL magic packet support?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
I have a T1700X-16TS JetStream 12-Port 10GBase-T Smart Switch with 4 10G SFP+ Slots.
I have 2 servers connected to it which I would like to set up Wake On LAN for. WOL works fine with both of them on a dumb (unmanaged) switch, but when I connected them both to the JetStream, WOL no longer works. I used a packet sniffer and found that the magic packets aren't travelling from 1 server to the other (and vice versa). Both are on the same VLAN, on DHCP (through an external router).
Would anyone know what settings I need to change or set up on the switch to allow the magic packets to travel through the JetStream? I've disabled DoS and other protections but still no luck getting it to work.
Thanks in advance!
@John1234 Thank you for that. I saw that KB article actually but I thought it was only for communicating over the internet to another PC behind a TP-Link router.
Just to be clear, I just need to set up a static ARP and not all the other steps in that article, correct? Since some like virtual servers wouldn't apply in my case and even the binding steps are different since it's a different product (I just have a page to create a static ARP entry). I now have 2 entries - 1 for each server. I also reserved IP addresses for each server on the DHCP server (which is in the router, not this switch).
