Bridge network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bridge network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bridge network
Bridge network
2024-06-18 19:33:51 - last edited 2024-06-19 06:22:29

 

If I connect my router to a tp link cpe710. The first tp link cpe710 sends a signal to another tp link cpe710, and the second tp link cpe710 is connected to a second router, would the second router generate a Wi-Fi signal and receive Internet from the second tp link cpe710?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Bridge network-Solution
2024-06-19 06:21:44 - last edited 2024-06-19 06:22:29

  @dl00 

The network design can function as planned. This is the usage scenario for setting up a point-to-point network for transmitting the internet over great distances. Normally, the first CPE (configured as AP mode) connects to the router via Ethernet wire and sends signals to the second unit (set as client mode). The second unit has an Ethernet connector that allows other devices to connect. So you can connect a router to it. Here is a related article that explains this usage:How to build a Wireless Network between home and farm using tp-link products

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Bridge network-Solution
2024-06-19 06:21:44 - last edited 2024-06-19 06:22:29

  @dl00 

The network design can function as planned. This is the usage scenario for setting up a point-to-point network for transmitting the internet over great distances. Normally, the first CPE (configured as AP mode) connects to the router via Ethernet wire and sends signals to the second unit (set as client mode). The second unit has an Ethernet connector that allows other devices to connect. So you can connect a router to it. Here is a related article that explains this usage:How to build a Wireless Network between home and farm using tp-link products

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options