UDP Broadcast Packet Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

UDP Broadcast Packet Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
UDP Broadcast Packet Forwarding
UDP Broadcast Packet Forwarding
2014-03-13 01:15:55
Region : UnitedStates

Model : TL-SG1008

Hardware Version : Not Clear

Firmware Version :

ISP : Verizon


Trying to pass ArtNet UDP packets through a TK-1008G un-managed switch. ArtNet uses a directed broadcast to a class A network address.

My source device's IP address is 192.168.1.200. The ArtNet devices's IP address is 192.168.1.220.

The directed UDP broadcast packets are sent to 192.255.255.255.

If I directly connect the source device to the ArtNet device, the packets are received and the ArtNet works.

If I connect through the switch the ArtNet device doesn't receive the packets.

Any ideas ?

Thank you,

Steven J. Ackerman, Consultant
ACS, Sarasota, Florida
http://www.acscontrol.com
  0      
  0      
#1
Options
1 Reply
Re:UDP Broadcast Packet Forwarding
2014-04-15 16:58:58
Un-managed switch is stable and able to forward packets normally, check your other device and you will find the problem.
  0  
  0  
#2
Options