AP Restarting Continuously

AP Restarting Continuously

AP Restarting Continuously
AP Restarting Continuously
2025-08-05 14:22:43 - last edited 2025-08-22 08:21:54
Model: CPE510  
Hardware Version: V2
Firmware Version:

In my case my AP is restarting continuously, I have three devices installed in total 100 mtr range, my middle device is my AP and two others are clients of AP, this site already working from last 4 year with some small disconnecting issues but this time from last 20-30 days creating problem of disconnecting continuously, although some times in a day the working of the setup is fine but more of the time it's creating same problem for me what to do please reply and help. I want to tell you that there is some minute power fluctuation on the point where AP is installed but other equipments like PC and POE of CCTV cameras working fine 

  0      
  0      
#1
Options
1 Accepted Solution
Re:AP Restarting Continuously -Solution
2025-08-06 03:30:41 - last edited 2025-08-22 08:21:54

Hi  @Adesh_sri 

 

Thanks for posting here.

 

When the CPE restarting, did you check the LED status of the AP? Were they off? 

 

If it's the power issue, please change the powering Ethernet cable and observe the performance for some more time.

 

 

If when the disconnection occurs, the power is still there, we may troubleshooting the wireless link stability between them.

Below is a guide for your reference:How can I set up the AP + Client topology successfully?

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:AP Restarting Continuously -Solution
2025-08-06 03:30:41 - last edited 2025-08-22 08:21:54

Hi  @Adesh_sri 

 

Thanks for posting here.

 

When the CPE restarting, did you check the LED status of the AP? Were they off? 

 

If it's the power issue, please change the powering Ethernet cable and observe the performance for some more time.

 

 

If when the disconnection occurs, the power is still there, we may troubleshooting the wireless link stability between them.

Below is a guide for your reference:How can I set up the AP + Client topology successfully?

Recommended Solution
  0  
  0  
#2
Options