Pharos firmware version 2.2.2 has been released

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Pharos firmware version 2.2.2 has been released

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Pharos firmware version 2.2.2 has been released
Pharos firmware version 2.2.2 has been released
2020-01-25 22:52:44
Model: CPE610  
Hardware Version: V2
Firmware Version: 2.2.2

Pharos firmware version 2.2.2 has been released that fixed some serious bugs:

1.Fixed the problem that CPE might crash caused by stack overflow.
2.Fixed the compatibility problem with MikroTik AP.
3.Fixed the problem that CPE might fail to scan and connect to some AP's SSID.
4.Fixed the problem that CPE with client mode might fail to connect to AP with 802.11a mode only.

https://static.tp-link.com/2020/202001/20200102/CPE610(UN)_V2.0_2.2.2_Build%20191213.zip

 

But this time the firmware is for CPE610 V2 only and can't be flashed on older (and other) units (CPE210 v1, CPE510 v1, etc.) like v2.2.1

 

That means only CPE610 V2 has these bugs?

  0      
  0      
#1
Options
8 Reply
Re:Pharos firmware version 2.2.2 has been released
2020-01-28 18:32:19 - last edited 2020-01-28 18:33:53

@phongtom Yes, i am trying to install in a WBS210 v1.20 with 2.2.1 and is displayed the "Hardware not supported" error message.  I think now they are fixed the correct hardware version of the device, which check if is developed to them, or the new CPE610 hardware have another or different chipset

  0  
  0  
#2
Options
Re:Pharos firmware version 2.2.2 has been released
2020-01-28 19:06:49 - last edited 2020-01-28 19:11:56

 

Galenito wrote

Yes, i am trying to install in a WBS210 v1.20 with 2.2.1 and is displayed the "Hardware not supported" error message.

 

Firmware v2.2.1 for WBS210 is here (and yes, it installs on HW v1.20 too):

https://static.tp-link.com/2019/201907/20190725/WBS210(UN)_V2.0_2.2.1%20Build%20190620.zip

 

It's firmware v2.2.2 which is missing for WBS and other CPE[25]xx models.

 

CPE610 was never fully compatible with WBS/CPE[25]xx since CPE610 has fewer LEDs. You could install its earlier firmwares on WBS/CPEs, but then the LED display did'nt work as expectetd.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:Pharos firmware version 2.2.2 has been released
2020-01-28 23:29:47
Yes @R1D2, i said have the 2.2.1 in my WBS210 at a months ago, but when try to upgrade to 2.2.2 is the error message ;) If find a version 2.2.2 running in a WBS210, please share! Thanks and regards!
  0  
  0  
#4
Options
Re:Pharos firmware version 2.2.2 has been released
2020-02-28 17:48:48

NO NEWS??? i see the same 2.2.2 in different downloads country sites...

  0  
  0  
#6
Options
Re:Pharos firmware version 2.2.2 has been released
2020-02-28 18:42:06

@Galenito, where did you see it?

 

I looked for just yesterday and still no V2.2.2 for WBS510/210 or CPE510/210 on international or EU sites. Please share if you found the firmware for WBS/CPE.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#7
Options
Re:Pharos firmware version 2.2.2 has been released
2020-04-10 07:29:51

Is there any news?

  1  
  1  
#8
Options
Re:Pharos firmware version 2.2.2 has been released
2020-04-13 08:25:38

@phongtom any update for cpe510, my cpe510 v3.0 lost signal.

in the new ship device find 2.2.1 but is not possible to update device 2.2.0 , no download for the 2.2.1 firmware.

 

you have a link for download 2.2.1 for cpe510 (eu)?

  0  
  0  
#9
Options
Re:Pharos firmware version 2.2.2 has been released
2020-10-21 14:06:54
Nothing yet... if you find, share please ;) regards!
  0  
  0  
#10
Options