SOHO Switches
I just sent back a new TL-SG1428PE managed switch.... 30 min or so after opening the box! The BOX says the Hardware configuration is V3.6 The UNIT Says the Hardware configuration is V3.6 BUT THE FIRMW
Firmware Update
1Helpful
180Views
I'm experiencing a critical issue with VLAN isolation on my TL-SG1024DE. Problematic Setup: TL-SG1024DE: Configured with Port-Based VLAN 10 (Ports 1-18, untagged) and VLAN 20 (Ports 19-24, untagged) M
VLAN & Multi-NetworksFirmware Update
By
TakeItEasy
· Latest post 2025-07-02 12:21:27
by TakeItEasy
0Helpful
188Views
Yesterday I received a new TL-SG116E from Amazon. I live in Spain but the box indicated the unit was from Germnay. The hardware version is 2.20 and the firmware version is 1.0.0 Build 20230505 Rel.708
Firmware Update
1Helpful
807Views
Firmware Version 1.0.0 Build 20211209 Rel.52369 Hardware Version TL-SG108E 6.0 The TL-SG1016DE is printed on the front of the box and there are 16 ports on the device. However the firmware clearly say
Firmware Update
1Helpful
455Views
Hi, I'm already struggling couple of days with the topic so i need your help :) Lets start with the topology description ROUTER 1 -> ROUTER2 (access point) -> ROUTER3 (access point) -> SG108PE -> EAP1
ConfigurationPoENetwork ConnectivityFirmware Update
1Helpful
596Views
Hi, Had some issues with my TL-SG108E V6 not working as intended only doing 100M vs 1000M until I reseat the Rj45, put it down to a bad termination but this didn't work, so I decided to update from TL
Firmware UpdateNetwork ConnectivityConfiguration
3Helpful
1174Views
Hello, Can anyone help with the latest available FW for TL-SG1024DE v4? The stock fw is almost 5 years old now (1.0.0 Build 20191128 Rel. 43130) and wondering if a new version is available. Thanks for
Firmware Update
1Helpful
1097Views
I have a new TL-SG1428PE up and operational in our network but I went to update the firmware and am confused if it is Hardware Version 3.0 or 3.6. The Management portal has a hardware version of TL-SG
Firmware Update
2Helpful
864Views
I bought this switch last week and initially everything worked as expected. But because there has been a recent firmware update that included a security fix, I had to install it. I made sure I selecte
Firmware UpdatePoE
0Helpful
1086Views
Hello I have a TL-SG116E firmware version 1.0.0 build 20191128 rel.40081 Hardware version is 1.20 The latest update for firmware that I see in downloads is TL-SG116E(UN)_V1.2_20190909 Does anyone know
Firmware Update
0Helpful
923Views