Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Iam unable to connect my Ip camera through the switch to my nas which is also connected to the switch any ideas is there speciications on the swtich which will not allow the connection?
By
networkboss4u
· Latest post 2020-05-07 01:26:43
by Andone
0Helpful
768Views
Hello, I've just buyed sg108e. Connected it to WAN and to my other devices. Lights are okay, devices connected to the switch are okay and can access the internet. However, I've searched for ips on the
By
Efekurnaz
0Helpful
344Views
Hello, I'm trying to set up two wireless networks in two different VLANs, one for the usual devices (pcs, mobile, etc) and another one for IOT. I bought a TP link switch TL-SG108E which is connected t
1Helpful
3705Views
Hello Everyone, We are really struggling with setting up a LAG between our 2 switches. When setting the LAC up (static or LACP) the network goes down immediately (probably broadcast storm). We have se
By
DCO_GROUP_BV
· Latest post 2020-04-29 03:03:10
by Andone
0Helpful
1377Views
My managed switch will not accept the ARP defend to be enabled please cna you help in identfying what causes this to not enable Kind REgards
0Helpful
344Views
Hi, I have a simple questions, the switch T2600G-28TS support the stack configuration ? I can't find info on the manual for this config neither any link on the web gui.
0Helpful
898Views
Hi, Wondering if you can help me. I have a home office and need to run a VOIP telephone in a room which does not have (and cannot have) wired ethernet but has a strong wifi signal (in case relevant th
By
dwm
· Latest post 2020-04-27 09:25:50
by kyledawson
0Helpful
2053Views
I have a T1500G-8T V2 switch, using firmware 2.0.5 Build 20200109. I define 3 VLANs as follows: VLAN 1 = System = All ports untagged VLAN 2 = Only LAN = Ports 2-6 untagged VLAN 3 = Only Internet = Por
0Helpful
1732Views
I wanted to use the POE profile to label the ports so I could identify the item at the end of the cable. The POE profiles are limited to 10 but the switch I have has 28 ports. Is there any other way t
1Helpful
756Views
Hi Just bought a new switch TL-SG116E V1.2 and I run in to the realy wierd issue: I had 3 PC contected to the mikrotik and it worked .. then I reconected all to the TP switch and 2 worked well but one
0Helpful
970Views