Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
Hello, as a newbie to switches, I need a little help for my simple network. I have created two examples in the images below and I would like to ask the following: Assuming that my router is connected
VLAN & Multi-NetworksSwitch ACL
By
xmanhattan
· Latest post 2022-10-23 12:35:20
by xmanhattan
0Helpful
518Views
The online documentation references the old web interface, not the new one. The firewall houses the DHCP Server that has three VLANs (A1, B2, C3) that hands out DHCP addresses. The SG2210P uses Port 1
VLAN & Multi-NetworksSwitch ACLVLAN / WAP / Switch
0Helpful
225Views
Hello. I'm trying the problem on the switch it doesn't start the system. In the COM console I have already reset and select another backup image even so it does not start and gives the following error
Firmware UpdateSwitch ACL
0Helpful
629Views
I configure the following ACL to allow only ARP and IPv4 traffic: > Jetstream#show access-list > MAC access list 100 name: "Allow IP" > rule 10 permit logging enable type 0800 > rule 20 permit logging
Switch ACL
2Helpful
1306Views
I have created two VLANS (in addition to the default VLAN 1): VLAN2000: 192.168.20.0/24 VLAN4000: 192.168.2.0/24 I created an IP ACL with the following rules: Deny, Source: 192.168.2.0, 255.255.255.0
VLAN & Multi-NetworksSwitch ACL
0Helpful
362Views
Hello, following the this post I have the same problem with a TL-SG3428XMP. Unfortunately I can't find any suitable firmware (also BETA) that offers me a solution. Does anyone know? Thanks Update: ACL
VLAN & Multi-NetworksSwitch ACLFirmware Update
0Helpful
525Views
Hello all, I have a TL-SG3428MP and I'm quite happy with my configuration so far. Now I have a question regarding ACL. I set up the hardware in my office just to test everything. See the infrastructur
Switch ACL
By
StefanDevernon
· Latest post 2021-08-26 01:20:57
by Fae
1Helpful
1322Views
Dear Community, I'm looking for tips on how to construct an an ACL to apply on a specific port do the following: - allow all traffic to the router (192.168.1.1) - deny all traffic to/from the local su
Highlighted ThreadSwitch ACL
1Helpful
2077Views