Requests & Suggestions
11
VotesCurrently through the Omada Cloud Controller, when you try to assign a DHCP range on a switch under the Devices>
dhcp
By
Xentric
1152Views
2
VotesThe Network contains the ER7206 as the Fibre ISP service on a 1G Ethernet SFP/WAN port DHCP server feeding 4 Copper RJ45 LAN Ports and a TL-SG2210MP PoE Smart
1711Views
1
VotesHello, I would like to submit a technical feature request regarding DHCP Relay (IP Helper) functionality on TP‑Link switches.
DHCP Relay
By
HBEN1603
162Views
1
VotesPlease Support DHCP Snooping + ARP Snooping Its supported only in switch stand alone ! , but when you connect switches to om
dhcp snooping
2534Views
9
VotesFor instance, we have the option to set up a DHCP server on a switch, but when you try to set up a Reservations outside the DHCP Range
Currently when trying to assign a static IP for a device through DHCP reservations, you can not enter an IP outside the DHCP
992Views
0
VotesDeclinedDHCP Client Release
It would sure be nice if this unit had a method to rekease a DHCP client. It is a PIA without.
538Views
0
VotesHey there, I would like to set up a DHCP server for a VLAN interface with ip address 192.168.200.1 and limit the DHCP addres
By
SmutjeHannes
· Latest post 2025-04-16 01:47:44
by Clive_A
479Views
2
VotesHello, Wondering if there is a way or if this is in development to view the active DHCP leases in the router via OMADA and have the ability to clear them?
By
TelephoneGuy
733Views
4
VotesImplementedDHCP Option 43
@Fae Is there any plan to add DHCP option 43 to Omada This is common used and I use it a lot. I use for the most Option 43 in HEX
2539Views
3
VotesCurrently, it is only possible to specify 1 DHCP Relay address. It is not uncommon to have redundant DHCP servers in an envi
605Views
6
VotesSKY authenticates using Option 61 DHCP and this feature is lacking in OMADA routers. Consequently, the router is sat in it's box. Please implement Option 61
By
Magictorch1976
· Latest post 2023-05-04 15:38:59
by JCUK
1184Views