Controllers
TP-Link Omada Cloud SDN integrates Omada Devices including EAPs, JetStream Switches and Omada Routers, all are centrally managed with an Omada SDN Controller. Anything related to TP-Link's Omada SDN Controller, welcome to ask questions, join discussions and share your experience/knowledge here.
Controllers
This post is mainly from posts released by forum customer @Death_Metal, and I would like to thank @Death_Metal and others for the quality and professional Guide sharing you have contributed to the TP-
Highlighted ThreadACLVLAN & Multi-NetworksVPN
10Helpful
3013Views
I can connect to the OpenVPN Server configured with Omada Controller, but I can't access the local network I configured my Client-to-site VPN access and I can connect well (I am testing the connection
VPN
0Helpful
57Views
In the Omada controller, I had the ER706W device as a gateway. For this device I have defined OpenVPN Server SSL (server-client) with port 1194 and address 192.168.aaa.0/24. I had to change my router
VPN
0Helpful
69Views
Hello, I'm having little issue with Wireguard setup which I did not manage to find a solution for. I have a wireguard running on my omada with assigned local IP 192.168.95.10 this IP is totally made u
VPN
0Helpful
135Views
Hi there, I have a house in South-Africa where I set up an Omada supperted wifi network with a switch and various access points, all controlled by an OC200 controller. I know I can setup a VPN to conn
VLAN & Multi-NetworksVPN
0Helpful
132Views
Hi, I was wondering if it is possible to configure wireguard for a VLAN instead of a lossless subnet. The question is because i would like to configure application blocks, which is only possible (AFAI
VPN
0Helpful
98Views
I recently updated my Omada OC200 Controller to Firmware Version 5.13.24. After the update my OpenVPN Client-to-site Servers are no longer working. I had 3 OpenVPN servers running, each tied to the co
Firmware UpdateVPN
0Helpful
115Views
Hi, I have my existing solution at raspbery I re-direct port via NAT inside to my Raspbery and have working OpenVPN Tunnel. It took me a while to figure out, not easy task regarding routing. I bought
VPNOpenVPN
0Helpful
213Views
Hi all, I have an OC300 + ER605 + SG3428X + 2xEAP653 in the Main Branch and I'm planning to have ER605 + 2xEAP245 on the Small Branch. The 2 will be connected through VPN (if I will be able to make th
VPNController Installation
0Helpful
194Views
Hi all, I want to perform Site-to-Site VPN connection with one OC300 only and I'm trying to follow this FAQ: https://www.tp-link.com/it/support/faq/3640/ I don't have all the required components now,
VPN
0Helpful
144Views