Business Community > WiFi > Topology AC50
< WiFi

Topology AC50

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Topology AC50

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Topology AC50
Topology AC50
2017-09-22 13:28:32
Model :

Hardware Version :

Firmware Version :

ISP :

Hello together,

i have a question about a ac50 Controller. What is the prefered topology of connecting the caps?
Can i connect my router to the ac50 and connect the caps to the ac50, or do i need a switch between Router and ac50?
i want to connect my router to the ac50 and the caps directly to the ac50. But it seems not possible. Or do i need to use
specific ports? (router to port 1 and caps to port 2-5)
Thanks for your help...

Thorsten
  0      
 
  0      
 
#1
Options
6 Reply
Re:Topology AC50
2017-09-22 17:31:02

ljb wrote


Can i connect my router to the ac50 and connect the caps to the ac50, or do i need a switch between Router and ac50?
i want to connect my router to the ac50 and the caps directly to the ac50. But it seems not possible. Or do i need to use
specific ports? (router to port 1 and caps to port 2-5)
Thanks for your help...
Thorsten


Hi Thorsten, how many CAPs do you have? Actually, a PoE switch is more convenient for power supply and to manage all your CAPs. If you need to setup VLAN function or other advanced functions, a PoE switch is better. See the attachment.

But if you indeed don't need a switch, you can use a PoE injector for power supply. The power consumption of CAP is only 12.7w, so it can be used with 802.3af standard PSE (power supply equipment) together such as TL-POE150S.


File:
CAP Topology.pngDownload
  0  
  0  
#2
Options
Re:Topology AC50
2017-09-22 17:50:46

Carat1 wrote

H
The power consumption of CAP is only 12.7w, so it can be used with 802.3af standard PSE (power supply equipment) together such as TL-POE150S.


PoE power consumption depends also on cable length. Loss of efficiency on long cables is often around 20% to 30%. For example, on a 100m cable, resistance can be up to 12Ω, yielding a power loss of 3.85W. Total power for 802.3af available for a device on a 100m cable is therefore only 11.55 watts. But even on short cables you should leave some headroom. Therefore, CAP1750 is specified to require 802.3at, not 802.3af. Only CAP300 (5W) should be operated 802.3af.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:Topology AC50
2017-09-22 18:50:21
Thanks for your answer...
yes, i understand that it is more convenient with a POE Switch.
But is it possible to connect the CAPS (i have 2 CAP300) via LAN Cable direct to the ac50 (with seperate power for every CAP) or is a switch between ac50 and Router mandatory?

Router-------AC50--------CAP


You know what i mean?
  0  
  0  
#4
Options
Re:Topology AC50
2017-09-23 15:48:56

ljb wrote


But is it possible to connect the CAPS (i have 2 CAP300) via LAN Cable direct to the ac50 (with seperate power for every CAP) or is a switch between ac50 and Router mandatory?

Router-------AC50--------CAP


Yes, that's possible.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:Topology AC50
2017-09-25 11:40:01

ljb wrote

Thanks for your answer...
yes, i understand that it is more convenient with a POE Switch.
But is it possible to connect the CAPS (i have 2 CAP300) via LAN Cable direct to the ac50 (with seperate power for every CAP) or is a switch between ac50 and Router mandatory?
Router-------AC50--------CAP
You know what i mean?

Of course, it's possible. Every CAP300 can work with an external 12VDC/1.5A power supply or a PoE injector(at or af standard).
  0  
  0  
#6
Options
Re:Topology AC50
2017-09-25 11:51:10

R1D2 wrote

Therefore, CAP1750 is specified to require 802.3at, not 802.3af. Only CAP300 (5W) should be operated 802.3af.


You are right. 802.3at is preferred acceptable for CAP1750. But since CAP1750 only needs 12.7W, some 802.3af PoE injector will also work as long as the PoE injector (such as TL-POE150S, 15.4W) supports a needed power consumption.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 756

Replies: 6

Related Articles
ac 50 controller isolated network for guests.
127 0
ac 50 web portal authentication log-out
539 0
C64 Mesh Topology Issues
221 0
animated traffic in network topology
224 1
Cannot setup Facebook WIFI on AC50
416 0
Is this kind of topology supported?
420 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.