Business Community > WiFi > Which hardware revision label is valid?
< WiFi

Which hardware revision label is valid?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Which hardware revision label is valid?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Which hardware revision label is valid?
Which hardware revision label is valid?
2017-10-30 03:26:24
Model : EAP320

Hardware Version : ????

Firmware Version : 1.1.2

ISP :

Hello,

I bought a EAP320(EU) and the hardware label show "Ver.: 1.0" beside the serial number.
[CODE]EAP320#show system-info
System Description - AC1200 Enterprise Dual Band WiFI Access Point
System Name - EAP320
System Location - SHENZHEN
Contact Information - www.tp-link.com
Hardware Version - EAP320
Software Version - 1.1.2 Build 20170725 Rel. 46935
System Time - 2017-10-29 20:21:07
Running Time - 0 day - 10 hour - 55 min - 19 sec
[/CODE]

The EAP controller shows hardware revision 2.0




Which data is the truth?

Thanks
Ulf
  0      
 
  0      
 
#1
Options
2 Reply
Re:Which hardware revision label is valid?
2017-10-30 08:06:32
The hardware version is the one printed on the label on the device. The software version shown by EAPC might come from a version mismatch of the 20170725 firmware, which initially was intended for EAP v2, but actually was stamped 1.1.2 in the software and in the name of the ZIP archive.

Almost all version numbers - HW and SW - were bumped during the "Visual Identity Upgrade" on the occasion of the 20 year anniversary of TP-Link. They changed the logo on the cases and packages, in the web UI etc. But the actual hardware of EAPs did indeed not change. So there is actually no difference on v2 devices with a new logo and v1 devices with old logo. Both can be flashed with latest firmware, be it v1 or v2. Same for Pharos and some switches - e.g. TL-SG108E shows version 3 in the web UI as its HW version if flashed with version 3 firmware, but indeed still is HW version 2 according to the label.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Which hardware revision label is valid?
2017-10-30 15:23:58
Thanks for this informations. After upgrade to firmware 1.2.0 the EAP Controller shows the right hw revision.

R1D2 wrote

So there is actually no difference on v2 devices with a new logo and v1 devices with old logo. Both can be flashed with latest firmware, be it v1 or v2. Same for Pharos and some switches - e.g. TL-SG108E shows version 3 in the web UI as its HW version if flashed with version 3 firmware, but indeed still is HW version 2 according to the label.


Ah, ok. The firmware files for EAP320 on the TP-Link homepage have the same datestamp. I hope that this will not change in the future.

Thanks
Ulf
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 697

Replies: 2

Related Articles
AX11000 hardware revision
1604 0
Hard ware router issue
239 0
Archer AX10 Hardware revision - What the difference?
1428 0
Which hardware version on my TL-PA4010?
297 0
[TL-WR941HP] Discrepancy of hardware version between the label and admin interface.
2629 0
Which is best among routers?
361 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.